Humbrol 14ml No. 1 Tinlet Enamel Paint 8

Accessories.
Available at 1 merchants from £1.89 at £1.89.
Overall rating : 3.9 / 5 based on 5 reviews.

Offers available for Humbrol 14ml No. 1 Tinlet Enamel Paint 8 :

Merchant Item Price delivery-included
Amazon.co.uk Humbrol 14ml No. 1 Tinlet Enamel Paint 86 (Light Olive Matt)
Price : £1.89.
£1.89
Barcode / EAN article : 50724093.
Prices last-updated : 24/04/2019.


Photo of Humbrol 14ml No. 1 Tinlet Enamel Paint 8

Photo Humbrol 14ml No. 1 Tinlet Enamel Paint 8

This page lists all the shops selling the Humbrol 14ml No. 1 Tinlet Enamel Paint 8. We detected 1 offers for this product, for prices ranging from 1.89 at 1.89 Pounds. All prices include VAT

The prices are updated on a regular basis. Prices are updated every day, according to the technical capabilities of the merchant's site. Prices are provided by the shops. We constantly check that these prices are correct. However, due to the complexity of the work, some errorr might remain. Feel free to contact us if you notice an error. We will do our best to correct it

Hope to see you often. the team of LePrice wish you a good comparison!



Product information

A solvent-based enamel paint with a Matt finish Usage A solvent-based, fast dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available. Substrate A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always check on a small test area to check suitability). Application Brush straight from the tin or Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to one part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying Time Matt & Satin: 20-40 minutes touch dry and upto 24 hours for hard dry. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably over night). Coverage A 14ml tinlet covers approx 0.3m2 depending on thickness of application. How to Clean Brushes: Use Enamel Thinners. Airbrush: flush through using Humbrol Enamel Thinners. Product is permanent once dry.Humbrol Acrylic 14ml paints are non-toxic and water based so can be thinned with water removing the need for chemical thinners. Usage: A solvent-based fast-dry paint developed for use on plastic model kits but which can ...


Accessories : The most populars in the same price range ▾

Fixapart Ra.electr. capac. 470uf 35 V 10



range: -40 to +105°C. 470 uF Voltage 35 V Case: 13 x 20 mm Tolerance: ± 20 % Temp. Aluminium electrolytic capacitor Type: 105° Cap.

generic Steering Gear Tester Servo Motor



5-6. 38 x 1. 22 x 0. 5ms±0. 5mm Package Include: 1 x Steering Gear Tester. 0V Output Signal: 1. 5ms Size(L x W x H): approx. 93inch / 35 x 31 x 23. 1. Description: To easily detect and configure the server's virtual spaces, jitter and median Just for testing less than 55g steering gear Adjustment Mo

Fixapart Ra.electr. capac. 22uf 400 V 10



range: -40 to +105°C. 22 uF Voltage 400 V Case: 16 x 26 mm Tolerance: ± 20 % Temp. Aluminium electrolytic capacitor Type: 105° Cap.

Fixapart Mounting clip LED RTF-5010



Quick mounting, LED should be pressed in. Black plastic mounting clip for 5mm LED with an exterior reflector.

Fixapart Ra.electr. capac. 3300uf 16 V 1



range: -40 to +105°C. 3300 uF Voltage 16 V Case: 16 x 25 mm Tolerance: ± 20 % Temp. Aluminium electrolytic capacitor Type: 105° Cap.

Fixapart Glass tube fuse 5x20 fast 3.15



Specifications Construction: glass tube Ferrule caps: brass, nickel-plated Rated Voltage: 250 V Breaking capacity: 35 A.