Pro-ject S/E Upgrade Kit

Available at 1 merchants from £24.99 at £24.99.
Overall rating : 4.0 / 5 based on 6 reviews.

Offers available for Pro-ject S/E Upgrade Kit :

Merchant Item Price delivery-included Pro-ject S/E Upgrade Kit
Price : £24.99.
Barcode / EAN article : 5055581808564.
Prices last-updated : 17/04/2019.

Photo of Pro-ject S/E Upgrade Kit

Photo Pro-ject S/E Upgrade Kit

This page lists all the shops selling the Pro-ject S/E Upgrade Kit. We detected 1 offers for this product, for prices ranging from 24.99 at 24.99 Pounds. All prices include VAT

The prices are updated on a regular basis. Prices are updated every day, according to the technical capabilities of the merchant's site. Prices are provided by the shops. We constantly check that these prices are correct. However, due to the complexity of the work, some errorr might remain. Feel free to contact us if you notice an error. We will do our best to correct it

Hope to see you often. the team of LePrice wish you a good comparison!

Product information

This is an affordable upgrade kit for the Pro-Ject Debut (all models) Xpression (all models), Pro-Ject 1, 1.2, 2, RPM 4 or RPM 5 (all models), designed to improve the sound of these models without needing to buy a whole new hi-fi turntable. This simple but intuitive set adds qualities and features to your existing deck, which are only usually associated with much more expensive systems, enhancing the existing components to perform at their very best. Kit Includes- 2 Rubber Gromits and Screws- Rounded Drive Belt & Alternative PulleyHow does it work?By placing the two rubber gromits under the motor (where the transit screws are usually fitted) and screwing into place with the screws supplied, the motor is better decoupled (isolated) from the turntable plinth. By doing this, unwanted vibrations from the motor are dramatically reduced, causing less unwanted resonance in the overall sound performance, essentially allowing the tonearm to transmit the sound signal better.The new pulley is fitted to the motor by removing the existing pully (there may be a small screw holding the existing pulley in place - this needs to be removed), and placing the new unit in the same position. The rounded belt is placed into position in the same way as before. These simple steps again help reduce unwanted resonance within the turntable's component parts, and are features normally found on much more expensive models.Note: Owners of the Pro-Ject Debut S/E3 turntable do not need to purchase this kit, it is part of the feature set of the Special Edition model.

Accessories : The most populars in the same price range ▾


of Ways:2 to 3 Operating Temperature Max:140°C Operating Temperature Min:-40°C Pitch Spacing:3mm Termination Type:IDC Wire Area Size Max:0. 4mm² Wire Diameter:2. 9mm² Wire Area Size Min:0. CONNECTOR SPLICING IDC RED' Connector Type:Splice Series:SCOTCHLOK Insulator Colour:Red Termination Method:IDC

pulse Microphone Stand Short Black - Pri


3m Scotch-weld Acrylic Adhesive Dp810 50

Scotch-weld Acrylic Adhesive Dp810 50ml SCOTCH-WELD ACRYLIC ADHESIVE DP810 50ML Adhesive Type:Adhesive Dispensing Method:Dual Cartridge Chemical Colour:Green SVHC:No SVHC (18-Jun-2012) Series:Scotch Weld Volume:50ml Adhesive Applications:Bonding General Purpose.

pro-elec Extension Tower 10G With Surge

56ft Cable Length - Metric:2m Connector Type A:UK Mains Plug Current Rating:13A Jacket Colour:Black Voltage Rating:250V Connector Type B:UK Mains Socket No. EXTENSION TOWER 10G WITH SURGE BLACK Cable Assembly Type:Mains Cable Length - Imperial:6. of Outlets:10 Voltage Rating V AC:250VAC Power distri

fibox Box Grey Ip65 240x191x107mm - Pric

52" External Depth - Imperial:9. 21" External Width - Imperial:7. BOX, GREY, IP65, 240X191X107MM Enclosure Type:Utility Box External Height - Metric:107mm External Width - Metric:191mm External Depth - Metric:240mm Enclosure Material:ABS (Acrylonitrile Butadiene Styrene) Body Colour:Grey IP Rating:I


This Model: W-889 W-889 TELE-GAINER ANTENNA.