Analogue Studio 45RPM 7inch Centre Hole

Available at 1 merchants from £8.99 at £8.99.
Overall rating : 4.1 / 5 based on 8 reviews.

Offers available for Analogue Studio 45RPM 7inch Centre Hole  :

Merchant Item Price delivery-included Analogue Studio 45RPM 7inch Centre Hole Spindle Adapter
Price : £8.99.
Barcode / EAN article : 5055581803026.
Prices last-updated : 17/04/2019.

Photo of Analogue Studio 45RPM 7inch Centre Hole

Photo Analogue Studio 45RPM 7inch Centre Hole

This page lists all the shops selling the Analogue Studio 45RPM 7inch Centre Hole . We detected 1 offers for this product, for prices ranging from 8.99 at 8.99 Pounds. All prices include VAT

The prices are updated on a regular basis. Prices are updated every day, according to the technical capabilities of the merchant's site. Prices are provided by the shops. We constantly check that these prices are correct. However, due to the complexity of the work, some errorr might remain. Feel free to contact us if you notice an error. We will do our best to correct it

Hope to see you often. the team of LePrice wish you a good comparison!

Product information

Analogue Studio 45 RPM 7" Centre Hole Spindle Adapter Machined from a single block of aluminum. At a very reasonable price, this encourages every vinyl lover to dust off their 45RPM records! The adaptor is simply fitted over the spindle of your turntable and the record will fit the outside of the adaptor. then simply sit back switch on and enjoy the music.

Accessories : The most populars in the same price range ▾

cablefinder QTY 25x 22.8mm Black Cable C

8mm (Size 9). 7mm (Size 5), 17. 8mm (Size Number 9) Screw Fixing Hole - 6mm Internal Diameter Other - Manufactured From Black LDPE Can be used with - These cleats are usually used for fixing 'steel wired armoured (SWA) cable' to a wall or other surface. 8mm (Size 7), 22. 6mm (Size 3), 12. They can b

Underwood Audio SPADE CONNECTORS - 8 ANG

Two large grub screws firmly secure the cable in place. Item code: SPATER01. 5mm, body material brass, plating gold. The red and black high-grip rubber insulators simply push over the spade barrel once the screws have been tightened. Specification: overall blade width 17mm, spade jaw widths 10mm and

national semiconductor Ic Tone Decoder 1

75V Termination Type:SMD. of Outputs:1 Output Current Max:0. of Input Channels:1 No. 1A Output Voltage Max:1V Package / Case:SOP Supply Current:10mA Supply Voltage Max:9V Supply Voltage Min:4. 75V to 9V Operating Temperature Range:0°C to +70°C Digital IC Case Style:SOP Frequency Max:500kHz Input Vol

ael crystals Crystal Oscillator 4MHZ QTY

of Pins:4 Operating Temperature Range:0?C to +70?C Output Drive Level:Universal Output Frequency:4MHz Output Voltage:5V Resonator Case:Radial Leaded Rise Time:10ns Supply Current Max:30mA Temperature Stability + @:100ppm Temperature Stability - @:100ppm. 8mm x 12. 9mm Oscillator Output Compatibility

cablefinder 3M - 3.5MM STEREO PLUG TO 2

Cable strain relief to protect the cable - Enables the cable to be bent in a multitude of directions without breaking. Unbalanced Connection: < Red XLR Connector XLR Pin 1 - Connected to the sleeve (ground) XLR Pin 2 - Connected to the tip XLR Pin 3 - Connected to the sleeve (ground) Black XLR Conne

dtl Stylus Needle for 78 rpm records - F

Plays 78's (NOT 33 / 45 rpm records, it will damage those, so change stylus before using on standard vinyl records)Stylus Fits: Virtually all Steepletone Models except Edinburgh & ST1200e (does not fit original SRP1R)Newer SRP1R & the latest SRP1R-09 USB model uses this stylusFITS: 2055/2055D, 3155D