SainSmart 5pcs StepStick A4988 Stepper D

3D Printer Replacement Parts.
Available at 1 merchants from £24.17 at £24.17.
Overall rating : 4.1 / 5 based on 7 reviews.

Offers available for SainSmart 5pcs StepStick A4988 Stepper D :

Merchant Item Price delivery-included
Amazon.co.uk SainSmart A-4988 5PCS StepStick Stepper Driver for Reprap Prusa Mendel 3D Printers (Pack of 5)
Price : £24.17.
£24.17
Barcode / EAN article : 6955170832507.
Prices last-updated : 20/06/2018.


Photo of SainSmart 5pcs StepStick A4988 Stepper D

Photo SainSmart 5pcs StepStick A4988 Stepper D

This page lists all the shops selling the SainSmart 5pcs StepStick A4988 Stepper D. We detected 1 offers for this product, for prices ranging from 24.17 at 24.17 Pounds. All prices include VAT

The prices are updated on a regular basis. Prices are updated every day, according to the technical capabilities of the merchant's site. Prices are provided by the shops. We constantly check that these prices are correct. However, due to the complexity of the work, some errorr might remain. Feel free to contact us if you notice an error. We will do our best to correct it

Hope to see you often. the team of LePrice wish you a good comparison!



Product information

This product is a carrier board or breakout board for Allegro's A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection; we therefore recommend careful reading of the A4988 datasheet (380k pdf) before using this product. This stepper motor driver lets you control one bipolar stepper motor at up to 2 A output current per coil (see the Power Dissipation Considerations section below for more information). The equivalent to A4983-board but offers over current protection. If the boards get too hot, they will interrupt the current until it cools a bit. If the current is too high for the heat sinking, the motors will pulse as the current is interrupted and restored. Note: The link is 3D documentation: https://s3.amazonaws.com/Barsoom/Z0/Z00IIG6Z/3D.rar.


3D Printer Replacement Parts : The most populars in the same price range ▾

deep-deal 4 xCYS S3001 17g/3.2kg/ .14sec



6, D:34. 2kg-cm @ 6VWeight: 17g /Power Supply: 4. 2kg/. 14 sec/60° @ 4. 8V/ 6VMetal GearConnector type: JR/Futaba compatibleDimension (mm): A: 28. 2, E: -Includes:1 x servo1 x servo horn setNoteWe also can sell any parts for this servo(like servo horn sets,beaing,gear,or shell body. 14sec Metal Gear

deep-deal 4 xCYS S3001 17g/3.2kg/ .14sec



6, D:34. 2kg-cm @ 6VWeight: 17g /Power Supply: 4. 2kg/. 14 sec/60° @ 4. 8V/ 6VMetal GearConnector type: JR/Futaba compatibleDimension (mm): A: 28. 2, E: -Includes:1 x servo1 x servo horn setNoteWe also can sell any parts for this servo(like servo horn sets,beaing,gear,or shell body. 14sec Metal Gear

sainsmart ainSmart GPIO Expansion Kit fo



Packge includes: 1x Rainbow cable 1x Breadboard 1x GPIO adapter board. GPIO expansion kits, contains three pieces: a 26-pin GPIO cable, a breadboard and a GPIO adapter board.

Povos 1.75mm PLA Filament 1kg/2.2lbs for



The diameter stays stable and consistent and filament holds exceptionally toght tolerances. 8CM Printer Temperature: 200-260 Celsius Tips 1. Specifications Material: PLA Colour: Transparent Filament Diameter: 1. 1mm Spool Hole Diameter: 3. So if have a 3D printer, this is the place you can get your

Signstek Aluminum Flexible Z Axes Shaft



Shaft coupler often used to connect servo motor, stepper motor, encoder, screw driving, machine platform, etc. The motor shaft coupler provides an extremely tight grip without marring the shaft. The coupler also includes grub screws for shaft flats. Shaft: 5 x 8 mm Length: 25 mm Diameter: 19 mm Size