n/a RepRap Mega Pololu Compatible Shield

3D Printers.
Available at 1 merchants from £9.88 at £9.88.
Overall rating : 4.6 / 5 based on 18 reviews.

Offers available for n/a RepRap Mega Pololu Compatible Shield :

Merchant Item Price delivery-included
Amazon.co.uk RepRap Mega Pololu Compatible Shield - RAMPS [Electronics]
Price : £9.88.
£9.88
Barcode / EAN article : 742128272296.
Prices last-updated : 16/07/2018.


Photo of n/a RepRap Mega Pololu Compatible Shield

Photo n/a RepRap Mega Pololu Compatible Shield

This page lists all the shops selling the n/a RepRap Mega Pololu Compatible Shield. We detected 1 offers for this product, for prices ranging from 9.88 at 9.88 Pounds. All prices include VAT

The prices are updated on a regular basis. Prices are updated every day, according to the technical capabilities of the merchant's site. Prices are provided by the shops. We constantly check that these prices are correct. However, due to the complexity of the work, some errorr might remain. Feel free to contact us if you notice an error. We will do our best to correct it

Hope to see you often. the team of LePrice wish you a good comparison!



Product information

RepRap Arduino Mega Pololu Shield, or RAMPS for short. It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack. Version 1.4 uses surface mount capacitors and resistors to further cover edge issue cases. Features: It has provisions for the cartesian robot and extruder. Expandable to control other accessories. 3 mosfets for heater / fan outputs and 3 thermistor circuits. Fused at 5A for additional safety and component protection Heated bed control with additional 11A fuse Fits 5 Pololu stepper driver board Pololu boards are on pin header sockets so they can be replaced easily or removed for use in future designs. I2C and SPI pins left available for future expansion. All the Mosfets are hooked into PWM pins for versatility. Servo style connectors are used to connect to the endstops, motors, and leds. These connectors are gold plated, rated for 3A, very compact, and globally available. SD Card add on available -- Available now made by Kliment - Sdramps LEDs indicate when heater outputs on Option to connect 2 motors to Z for Prusa Mendel Lots of additional information, including schematic and manual, available after purchase.


3D Printers : The most populars in the same price range ▾

G4GADGET® Ipad mini "Anti-Explosion" Tem



Oleophobic coating helps resist fingerprints This screen protector features an oleophobic coating that resists oil contamination and fingerprints, making it easier to clean without the build up of grease that can lead to a rainbow sheen effect. Description High-tension tempered glass construction fo

3d filaprint ABS 1.75mm Pink 1Kg Spool o



There is approximately 133 Metres of high quality pink ABS filament on this 1 kg spool. For use on today's 3D desktop printers such as the MakerBot range, Prusa i3, Reprap mendal, Robo 3D, Up! Plus many other models. With a deep rich pink and a straight off the spool print, extruder nozzles running

G4GADGET® Ipad 2/3/4 "Anti-Explosion" Te



Oleophobic coating helps resist fingerprints This screen protector features an oleophobic coating that resists oil contamination and fingerprints, making it easier to clean without the build up of grease that can lead to a rainbow sheen effect. Description High-tension tempered glass construction fo

gaohou Smart Controller LCD 12864 for 3D



If you use a print job at night and parts department, which means that the new modifications LCD backlight would be suitable for you.

SainSmart A4988 Stepper Motor Driver 3D



The equivalent to A4983-board but offers over current protection. Note: The link is 3D documentation: https://s3. amazonaws. If the boards get too hot, they will interrupt the current until it cools a bit. This product is a carrier board or breakout board for Allegro's A4988 DMOS Microstepping Drive

hobby components 100k Thermistor 3D Prin



A thermistor is a type of resistor whose resistance varies significantly with temperature, more so than in standard resistors. 3% Operating Temperature: -60°C ~ 300°C Mounting Type: Through Hole. These 100k thermistors are ideal for 3D printing applications. Resistance in Ohms @ 25°C: 100K Resistanc